Advanced
®
Micro-Osmometer Model 3320 User’s Guide
48
Regulatory
approval type
Description
U.S. Safety This product has been listed by ETL testing laborato-
ries as being in compliance with the requirements of
UL 61010-1, Second Edition, “Safety Requirements
for Electrical Equipment for Measurement, Control
and Laboratory Use; Part 1: General Requirements".
The "US" in the lower right of the ETL mark demon-
strates this listing.
Canadian Safety This product has been listed by ETL testing laborato-
ries as being in compliance with the requirements of
CAN/CSA C22.2 No. 61010-1, "Second Edition,
“Safety Requirements for Electrical Equipment for
Measurement, Control and Laboratory Use; Part 1:
General Requirements". The "C" in the lower left of
the ETL mark demonstrates this listing.
EC Declaration of This product meets the intent of Directive 2004/108/EC
Conformity - EMC for Electromagnetic Compatibility. Compliance was
demonstrated using the following standards, as listed in
the Official Journal of the European Communities:
Consult the Declaration of Conformance certificate
shipped with the product for the latest update.
· EN 61326-1, Group 1, Class B, "Electrical
Equipment for Measurement, Control, and
Laboratory Use".
EC Declaration of This product meets the intent of Directive 2006/95/EC,
Conformity - Low the Low Voltage Directive. Compliance was demon-
Voltage strated using the following standards as listed in the
Official Journal of the European Communities: Consult
the Declaration of Conformance certificate shipped
with the product (if required) for the latest update.
· EN 61010-1, Second Edition, "Safety Requirements
for Electrical Equipment for Measurement,Control
and Laboratory Use - Part 1: General
Requirements".
(continued)
To Next Page
Loading...
Need help?
General
