39
ORIGINAL INSTRUCTIONS | ADVANCED | 01.2022 | 1002021-01 www.advanced.tech
Suspension
NOTE
Risk of damage!
An incorrectly adjusted suspension can impair riding
comfort and cause damage to the e-bike.
f Have the suspension checked by a bicycle dealer if
unusual noises/hard jolts occur when compressing or
rebounding.
NOTE
Risk of damage!
Permanent activation of the lock-out function increases
wear on the suspension components.
f Only use the lock-out function if it noticeably impro-
ves the operating behaviour.
f Deactivate the lock-out function again if the opera-
ting situation permits.
8.3 Suspension seat post
8.3.1 Adjusting the spring tension
Correctly adjusting a suspension seat post requires
expertise.
f If you are unsure, have the spring tension
adjusted by a bicycle dealer.
f Remove the suspension seat post from the seat tube.
f Turn the adjustment screw on the lower part of the seat
post:
– clockwise to increase the spring tension.
– anti-clockwise to reduce the spring tension.
f When adjusting, be careful not to unscrew the
adjusting screw too far: The adjustment screw
must be at least 1 cm inside the suspension seat
post.
f If you have any problems or are unsure, contact a
bicycle dealer.
8.4 Suspension rear triangle
8.4.1 Adjusting the spring tension
Correctly adjusting a rear suspension requires
expertise.
f If you are unsure, have the spring tension
adjusted by a bicycle dealer.
Mechanical suspension
With a mechanical suspension, you can usually adjust the
spring tension yourself if you have the necessary expertise:
f Pull off the cover caps of the immersion tubes towards
the top.
To Next Page
Loading...
General