50
Bell
ORIGINAL INSTRUCTIONS | ADVANCED | 01.2022 | 1002021-01
12 Bell
In order to give other road users clearly audible
acoustic signals while riding, your e-bike must be
equipped with a bell for participation in road traffic.
The equipment with a bell depends on the model. If
your e-bike does not have a bell when it is delivered,
you can safely retrofit one.
f If you need advice, contact a bicycle dealer.
f If the attached bell does not produce a clearly audible
signal, replace the bell.
f Position the bell on the handlebar so that it is within
easy reach (without taking your hand off the handlebar
grip).
f Familiarise yourself with the model-dependent opera-
tion of the bell before starting the ride.
13 Luggage carrier
You can carry light luggage on the luggage rack. The
luggage must be fixed to the carrier with a clamp or
with tension straps.
NOTE
Risk of damage!
Incorrect mounting/use of a luggage carrier can damage
e-bike components.
f Before retrofitting with a luggage rack, make sure
that your e-bike is suitable for it.
f Only use certified luggage carriers for retrofitting/
conversion (according to EN ISO 11243).
f Have the luggage rack mounted by the bicycle dealer.
f Do not make any structural changes to the luggage
carrier. This can affect its stability.
f Observe the information on the maximum load capa-
city of the luggage carrier and the maximum permis-
sible total weight for your e-bike.
The maximum load capacity of luggage carriers is usually:
• 25 kg for rear carrier
• 7 or 12 kg for front carrier
To Next Page
Loading...
General