61
ORIGINAL INSTRUCTIONS | ADVANCED | 01.2022 | 1002021-01 www.advanced.tech
Maintenance
components installed on the e-bike every six months:
– Components of the chain drive or belt drive
Chain drive → Chapter 4.1.1 „Wear and maintenance“;
Belt drive → Chapter 4.2.1 „Wear and maintenance“.
– E-drive
→ Manufacturer's instructions for the e-drive.
– Front and rear wheel brake
Disc brake → Chapter 5.3.4 „Wear and maintenance“ and
→ Chapter 5.3.6 „Checking the disc brake“; coaster brake
→ Chapter 5.4.5 „Checking the coaster brake“;
Rim brake → Separate manufacturer's instructions for the
rim brake.
– Gear shift components
Derailleur gear systems → Chapter 6.1.2 „Wear and
maintenance“ and → Chapter 6.1.4 „Checking the derailleur
gear system“;
Hub gear systems → Chapter 6.2.2 „Wear and maintenance“
and → Chapter 6.2.4 „Checking the hub gear system“.
f If you have questions about maintenance or are unsure,
contact a bicycle dealer.
f In addition, have professional maintenance carried out
by a bicycle dealer.
The intervals for professional maintenance depend
on the type and intensity of use.
Recommendation: Have professional maintenance
carried out at least every 1000 kilometres of cycling.
f For individual/use-dependent recommendations on
maintenance intervals or uncertainties, contact a
bicycle dealer.
f Have the maintenance carried out by the bicycle dealer
confirmed in the form at the end of these instructions
(→ Chapter 24 „Professional maintenance / inspection“).
20.3 Faults and repairs
In the event of damage due to improperly performed
repair work, the warranty/guarantee may be refused.
f In the event of malfunctions, always contact a bicycle
dealer to determine the cause and to remedy the
malfunction/for repairs.
20.4 Torque specifications
You will find the details of the corresponding torques
directly on the respective screws on the e-bike.
f If you are unsure about the correct torque, consult a
bicycle dealer.
To Next Page
Loading...
General