55
ORIGINAL INSTRUCTIONS | ADVANCED | 01.2022 | 1002021-01 www.advanced.tech
Using the e-bike
19 Using the e-bike
The following is a brief description of the operating steps
required to use your e-bike.
Detailed descriptions of the individual functions/operations
including warnings can be found in the respective separate
sections on the components of your e-bike.
f Be sure to read separate sections completely and
follow instructions before first use.
f If you are unsure or have problems with your e-bike or
individual components, please refer to the separate
sections or contact a cycle dealer.
19.1 Preparation
19.1.1 Adjusting the seat position
WARNING
Risk of accident and injury!
If the seating position is incorrectly adjusted, you may
not be able to reach e-bike components properly. Increa-
sed risk of accidents! An incorrectly adjusted sitting
position can also cause muscle tension and joint pain.
f Adjust the seat position correctly before driving off.
f If necessary, have the seat position adjusted by a
bicycle dealer.
The optimum seating position depends on your body size,
the frame size of the e-bike, the intended use and the set-
tings of the e-bike.
The seat position is correctly adjusted when:
• The knee angle of your upper leg and your arm angle
are 90° degrees,
• Your front knee is above the axis of the front pedal,
• Your arms are relaxed and slightly bent outwards,
• Your back is not perpendicular to the seat post,
• The handlebars and all operating components are
adjusted so that you can reach and operate them safely.
90°
90°
Abb.: 24 Optimum seating position
To Next Page
Loading...
General