21 EKI-1511X/1512X User Manual
Chapter 3 Configuration
DNS Setting
In order to use the DNS feature, you need to set the IP address of DNS server to be
able to access the host with the domain name. The device provides Primary DNS
server and Secondary DNS server configuration items to set the IP address of the
DNS server. Secondary DNS server is included for use when Primary DNS sever is
unavailable.
DHCP Timeouts
If you select DHCP as IP configuration mode, the device will retry getting DHCP
response before timeouts until network settings are assigned by the DHCP server. If
the DHCP/BOOTP server is unavailable, the device will use Address auto configura-
tion (based on RFC 3330 and RFC 3927) for IP setting.
3.4 Setting Serial Parameters
This section explains how to configure the serial communication parameters of serial
device server using this utility. There have various operation modes that are suitable
for different applications.
Note! When you have finished the configuration of these settings for each cat-
egory, please press the “Apply” button in order to make these settings
effective on the Serial Device Server. (Will reboot your Serial Device
Server)
To Next Page
Loading...
Need help?
General
