EKI-1511X/1512X User Manual 58
6.1 Overview
The purpose of the Console Configuration is to help you manage your device in con-
sole mode. One of the main functions of the console mode is to change the web con-
figuration login password. You can use terminal software like Hyper Terminal, Telix
and other related terminal software.
6.2 Command List
Help
You might type the “help” command or press <Tab> twice to show the supported
command list.
[Usage] help
[Function] Display help information of command list
You might use “help” command to show the usage of all commands.
[Usage] help [command]
[Function] Show the usage of command
Table 6.1: Console Command List
Command Function Description
system Show or configure the system information
port Show or configure the serial ports information
portadv Show or configure the serial ports advanced settings
mvcom Show or configure the serial ports in Virtual COM mode
mctrl Show or configure the serial ports in Control mode (USDG)
mdata Show or configure the serial ports in Data mode (USDG)
net Show or configure the Ethernet ports settings
password Set or change the password
apply Write settings to the flash memory and reboot the system immedi-
ately
exit Terminate the shell session
help Display help information of command list
<tab> <tab> Display help information of command list
import Import the serial device server all settings
export Export the serial device server all settings
monitor Monitor the serial ports status
alarm Show or configure the auto warning functions including mail alarm
and SNMP alarm
time Show or configure the time information
service Enable or disable the web, Telnet and SNMP functions
To Next Page
Loading...
Need help?
General
