EKI-1511X/1512X User Manual 28
Peer Number
Set the number of network device which you want to connect. You can set a maxi-
mum of sixteen network devices which you want to connect. You need to fill out the
IP Address and Port of network devices which you want to connect.
Data Pack
Data pack means you can set condition of receiving data from serial port to be a
package according to your application. There are four options to set the data packing:
by data size (Byte), by time interval (ms), by character timeout (4 Bytes), or by end of
character.
To Next Page
Loading...
Need help?
General
