ZP6 - USSR Zone 5 +6 hours 6 pm
WAST - West Australian Standard +7 hours 7 pm
CCT - China Coast, USSR Zone 7 +8 hours 8 pm
JST - Japan Standard, USSR Zone 8 +9 hours 9 pm
EAST - East Australian Standard GST
Guam Standard, USSR Zone 9
+10 hours 10 pm
IDLE - International Date Line
NZST - New Zealand Standard
NZT - New Zealand
+12 hours Midnight
• SNTP Sever IP: Set the SNTP server IP address.
• Switch Timer: Displays the current time of the switch.
• Daylight Saving Period: Set up the Daylight Saving beginning time and Daylight Saving ending time.
Both will be different in every year.
• Daylight Saving Offset (mins): For non-US and European countries, specify the amount of time for
day light savings.
• Synchronization Interval (secs): The Synchronization Interval is used for sending synchronizing
packets periodically. Users can assign in the range of 64s to 1024s. The default setting of values is “0”
which means that you disable the auto synchronizes feature in the SNTP client mode. You can enable
the feature when filling the interval range between 64s and 1024s.
•
Click
To Next Page
Loading...
