Advantech EKI-2548I - Figure 3.1-12 Email Alert Configuration

Alert – Email Alert Configuration
When the specific event occurs, the system will send the alert to the email account assigned by users.
Users can assign the mail server IP, email account, and forwarded email account for receiving the event
alert.
• Email Alert: Enable or disable the email alert function.
• SMTP Server IP Address: Assign the mail server IP address.
• Authentication: Tick the check box to enable and configure the email account/password for
authentication.
¾ Mail Account: Assign the email account to receive the alert. Ex: johnadmin
. The email account,
which users had assigned in the SMTP Server IP Address column, must exist on the mail
server.
¾ Password: Type the password to the email account.
¾ Confirm Password: Re-confirm the password.
• E-mail of Recipient 1 ~ 4: Assign up to 4 email accounts to receive the alert.
•
And then, click
A
pply
to have the configuration take effect.
Figure 3.1-12 Email Alert Configuration
33 Chapter3