Advantech SIMB-M21 - Page 75

69 SIMB-M21 User Manual
Chapter 3 BIOS Setup
3.5.1.4 Memory Configuration
 Memory Configuration
Display system memory information.
 DIMM profile[Default DIMM profile]
Select DIMM timing profile that should be used.
Configuration options: [Default DIMM profile] [XMP profile 1] [XMP profile 2].
 Memory Frequency[Auto]
Select Memory Frequency in Mhz.
Configuration options: [Auto] [1067] [1333] [1600] [1867] [2133].
 Max TOLUD[Dynmic]
Maximum Value of TOLUD.
Configuration options: [Dynamic] [1 GB] [1.25 GB] [1.5 GB] [1.75 GB] [2 GB]
[2.25 GB] [2.5 GB] [2.75 GB] [3 GB].
 NMode Support[Auto]
NMode support Option.
Configuration options: [Auto] [1N Mode] [2N Mode].
 Memory Scrambler [Disable]
Enable or Disable Memory Scrambler support.
Configuration options: [Disabled] [Enabled].
 RMT Crosser Support[Disable]
Enable or Disable RMT Crosser Support.
Configuration options: [Disabled] [Enabled].
 MRC Fast Boot[Ensable]
Enable or Disable MRC fast boot.
Configuration options: [Disabled] [Enabled].
 DIMM Exit Mode[Auto]
DIMM Exit Mode control.
Configuration options: [Auto] [Slow Exit] [Fast Exit].