(3) Data
Data (8 digits) + decimal point (1 digit)
The decimal point is fixed to the second position from the leftmost.
(4) Exponential sign and data
E + 15
5
• E + 00
5
E - 12
(5) Data delimiters
® : CR, LF, EOI
0 : LF
(c) : EOI (synchronous with the last data)
Three types of delimiters (a to c) can be selected by programs.
* When HEADER of the address switch on the rear panel is set to OFF,
two space codes are output in the header position.
4—6
To Next Page
Loading...