AEC IST5015 - Unloading and Unpacking

IST5 Tower UPS 10kVA~40kVA User Manual 11
Installation Instruction
The weight for the UPS cabinet is shown in Table 1.1
Table 1.1Weight for the cabinet
Configuration
Weight
10kVA/15kVA Standard Backup Type
50kg(No Batteries Included）
10kVA/15kVA Long Backup Type
28kg
20kVA/30kVA Standard Backup Type
88kg(No Batteries Included)
20kVA/30kVA Long Backup Type
50kg
40kVA Long Backup Type
61kg
3.2 Unloading and Unpacking
3.2.1 Moving and Unpacking of the Cabinet
The steps to move and unpack the cabinet are as follows：
1. Check if any damages to the packing. (If any, contact to the carrier)
2. Transport the equipment to the designated site by forklift, as shown in
Fig.3-5.
Fig.3-5 Transport to the designated site
3. Unpack the package (see Fig.3-6).