AEG 30Z - Using the Needle Threader (for AEG 35 Z)

Using the needle threader (for AEG 35Z)
Raise the needle to its highest position and
lower the presser foot.
Take the thread in front of the needle.
Hold the thread loosely and release the
lever slowly. The hook will turn and pass
the thread through the needle eye forming
a loop.
Pull the thread through the needle eye.
Attention:
Turn the power switch to the o position
("O").
1
2
1
1
2
1
Pass the thread around the thread guide.
Thread guide
Press the lever down as far as it goes.
The needle threader turns automatically
to the threading position and the hook pin
passes through the needle eye.
Needle
Hook
19
Instruction manual for Model AEG 30Z /AEG 35Z