Blind Hem
Secure the bottom of skirts and pants with a blind hem, this stitch will sew without stitches
showed on the right side of the fabric.
Blind hem for stretch fabrics.
Blind hem for firm fabrics.
Fold the fabric as illustrated with the reverse
side up.
First carry out an overcasting stitch as
shown in left picture.
5mm
Reverse side
Overcasting stitch
Please Note:
It takes practice to sew blind hem. Always
make a sewing test first.
Place the fabric under the foot. Turn the
handwheel forwards until the needle swings
fully to the left. It should just pierce the fold
of the fabric. If it does not, adjust the stitch
width accordingly.
Needle drop point
Sew slowly, guiding the fabric carefully
along the edge of the guide.
Turn over the fabric.
Reverse side
Right side
Stitch Length Stitch Width
1 1
2 23
1
1
2
1
2
3
1
1
2
36
To Next Page
Loading...
