Free motion darning, embroidery and
monogramming
-
Turn the stitch length dial to the desired
length.
-
Turn the stitch selector to straight stitch,
center the needle position.
-
Position the fabric to be darned under
the presser foot together with the under
laying fabric to be used.
-
Lower the presser foot and sew
alternately forward and reverse using
the lever.
-
Repeat this motion until the area to be
darned is filled with rows of stitches.
For reverse sewing instructions, see page
28.
Install the darning plate.
Darning
2~4 0
Stitch Length Stitch Width
45
To Next Page
Loading...
