Zipper insertion
-
Stitching around the zipper.
-
Remove the basting and press.
Please Note:
When sewing, be sure that the needle does
not touch the zipper, otherwise the needle
may bend or break.
2
1
3
4
5
6
-
Place the right sides of the fabric
together. Sew a bottom seam 2cm from
the right edge of the zipper bottom stop
position. Sew a few stitches in reverse
to lock. Increase the stitch length to
maximum, set the tension below 2 and
baste the remaining length of the fabric.
-
Fold back to the left the seam allowance.
Turn under the right the seam allowance
to form a 3mm fold.
Inserting a side zipper
2cm
5mm
3mm
Reverse stitches
Basting stitching
Reverse side
1
2
3
4
5
6
41
To Next Page
Loading...
