Scallop stitching
The wave-shaped repeating pattern, that looks like shells, is called "scalloping". It is used
to decorate the collar of blouses and the edges of knitting projects.
Shell tuck stitching
Use a lightweight fabric (tricot, for
example).
Fold and stitch on the bias.
When the needle swings to the right, allow
the needle to just clear the folded edge of
the fabric.
After stitching, open the fabric and iron
press the tucks flat to one side.
Scallop stitching
Stitch along the edge of the fabric, making
sure not to sew directly on the edge of the
fabric.
For better results, apply spray starch onto
the fabric and press with a hot iron before it
is sewn.
Trim along the stitches, be careful not to cut
the stitches.
2~3 3~5
Stitch Length Stitch Width
0.5~1 3~5
Stitch Length Stitch Width
51
To Next Page
Loading...
