AEMC 8500 - 3 Specifications; Electrical

Digital Transformer Ratiometer DTR
®
Model 8500 7
CHAPTER 3
SPECIFICATIONS
3.1 Electrical
Ratio Range:
Autoranging, 0.8000 to 1500.0:1
Accuracy*: Ratio < 10 to 1: ± 0.2% of Reading
Ratio ≤ 10 to 1000 to 1: ± 0.1% of Reading
Ratio > 1000 to 1: ± 0.2% of Reading
Excitation Signal: PT/VT Mode: 44Vrms maximum
CT Mode: Auto Level 0 to 1A, 0.1 to 5Vrms
Excitation Current Display: Range: 0 to 1000mA
Accuracy: 2% R ± 2mA
Excitation Frequency: 70Hz
Display:
LCD Character, 20 x 2, large format, LED backlight, day/night visible
Measurement Method: In accordance with ANSI/IEEE C57.12.90
Power Supply:
Dual operation; rechargeable NiCd battery & 115/230V, 50/60Hz line
supply. DTR
®
may be changed from 115/230V by internal switch at any
time.Unitsavailablewithfactorypresettingof115Vor230V.
Batteries:
12V,5x2NiCdpacks,1300mAH,PanasonicP-130SCRorequivalent
Battery Life:
Upto10hrs.continuousoperation.
May be used while recharging. Low battery LCD indication.
Charging Time: 14 hrs typical, C/10 rate
Line Fuse: 115V: 1.0A, 5 x 20mm, slow acting
230V: 0.5A, 5 x 20mm, slow acting
* 23°C ± 5°C, 50 to 70% RH, full battery charge, no external elds or noise.