5.2.2. Additional control wiring.
To ensure that you will have the additional elements needed for wiring everything from the
control equipment to the WAGO exposed female connectors that are supplied with the BC 2000
CAB W panels, we offer two additional component kits made up of cables for digital and analog
audio and connectors. The two kits are alternatives; you will find one better suited to your needs
than the other:
- Additional control wiring kit for the standard BC 2000 (code 522-300-101).
This kit is composed of cables and connectors you will need to custom-make each control
cable:
• One 100-meter reel of PA 03 DR red cable.
• One 100-meter reel of PA 03 DA blue cable.
• 25 male XLR connectors.
• 25 female XLR connectors.
- Additional control pre-wiring kit for the standard BC 2000 (code 522-300-102).
This kit is composed of 32 prefabricated cables for the audio equipment items and more
cable and other connectors for making the rest of the control cables:
• 16 four-meter lengths of XLR male cable, BLUE, for insertion into male Wago.
• 16 four-meter lengths of XLR male cable, RED, for insertion into male Wago.
• One 100-meter reel of PA 03 DG gray cable.
• 5 male XLR connectors.
• 5 female XLR connectors.
To Next Page
Loading...
Need help?
General