EasyManuals Logo

AERMEC FMT21 User Manual

AERMEC FMT21
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
11
English
USE

Use the key to select the Ventilation Only mode; the symbol will
appear on the display.
Using the key
, select the desired ventilation speed;
the set speed
, , and will appear on the display.
Choosing automatic management,
with the “VENTILATION ONLY” mode
set, the ventilation is fixed at the maximum speed.
The VENTILATION ONLY mode allows for the working of the fan coil even
when the hydraulic system is switched off; in the event that cold or hot water
is circulating, the ventilation will be continuous and not controlled by the
thermostat.
VENTILATION SPEED
Press the button repeatedly to set the ventilation speed.
You can manually choose from a number of ventilation speeds:
Minimum speed:
Average speed:
Maximum speed:
Automatic management of the speed:
Choosing automatic management, the
ventilation speed is
automatically determined on the basis of the difference between the
temperature set and the room temperature.
VENTILATION
CONTINUOUS VENTILATION
THERMOSTAT-CONTROLLED VENTILATION
To choose between continuous ventilation and thermostat-controlled
ventilation
, press the button and, within three seconds, press
either one of the buttons
or .
CONTINUOUS VENTILATION

Choosing continuous ventilation with the fan set at a determined ventilation
speed, this remains active even when the set temperature is reached.
If, on the other hand, the ventilation speed is in automatic management
mode, it will pass from one speed to another depending on the difference
between the temperature set and the room temperature. Once the set
temperature has been reached, the ventilation will still remain switched on, at
the minimum speed.
THERMOSTAT-CONTROLLED VENTILATION
Choosing thermostat-controlled ventilation with the fan set at a determined
ventilation speed, this switches off automatically when the set temperature is
reached.
If, on the other hand, the ventilation speed is in automatic management
mode, it will pass from one speed to another depending on the difference
between the temperature set and the room temperature. Once the desired
temperature is reached, the ventilation switches off automatically.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AERMEC FMT21 and is the answer not in the manual?

AERMEC FMT21 Specifications

General IconGeneral
BrandAERMEC
ModelFMT21
CategoryControl Panel
LanguageEnglish

Related product manuals