Aeroworks 30cc Freestyle Extra 260 Assembly Manual 5
Receiver Power System:
The Aeroworks 20cc-30cc Power Package is recom-
mended. The package consists of the following
items:
◊ 1 - Fromeco Sahara Regulator w/Deans in 2 JR out
◊
1 - Fromeco 2600mah Li-Ion Battery w/ Deans
◊
1 - Smart-Fly Super Switch HD w/ Deans
Ignition Power System:
If using the DLE 30 or any other gas engine the
Aeroworks Ignition Power System is recommended
◊ 1 - Fromeco 2600mah Li-Ion Battery w/
Universal Connector
◊ 1 - Smart-Fly Ignition Regulator
◊ 1 - MPI charge switch
Recommended Extensions:
22 AWG extensions are recommended throughout
the 30cc Freestyle Extra 260 QB-L. The following
sizes will be used:
◊ 2 - 3” Extensions For Receiver to Ailerons
◊ 2 - 6” Extensions For Ailerons
◊ 2 - 24” Extensions For Elevators
TOOLS & ADHESIVES NEEDED
TO COMPLETE
• Allen wrenches US and Metric.
• Electric drill and selection of bits
• Razor saw
• Flat head screwdriver
• Hobby heat gun
• Hobby iron and covering sock
• Masking tape
• Modeling knife
• Needle nose pliers or crimping tool
• Paper towels
• Pen, pencil or felt tipped marker
• Phillips screwdriver
• Rubbing alcohol
• Ruler and tape measure
• Scissors
• T pins
• Wire Cutters
• Blue Loctite
• CA kicker (optional)
• Thick, Thin and Medium CA
• Rubbing alcohol
• Wipes
WARNI NG
Some rubbing alcohols
may attack painted parts.
To Next Page