AGFA 5145 - Safety

DD+DIS014.02E
Maintenance
Edition 2, Revision 8 ADC Compact Section 12 / 1
(Type 5145 / 100/101/140/200/201/240)
1 Safety
· The ADC Compact has been designed for scanning medical X-ray image
plates and should only be used for these purposes.
· The ADC Compact must only be operated by qualified staff trained on the
machine.
· Make sure that the ADC Compact is constantly monitored in order to avoid
inappropriate handling, especially by children.
· Only trained service personnel must make repairs. Only authorized service
personnel must make changes to the ADC Compact.
· If there is any visible damage to the machine casing, do not start nor use
the ADC Compact.
· If you want to connect the ADC Compact with other devices, components
or assemblies and if the technical data do not permit determining whether
the combination with these devices, components or assemblies involves
hazards, you must consult the respective manufacturers to avoid danger
for operating personnel or the environment.
· Do not override or disconnect the integrated safety features.
· Switch off the ADC Compact before performing any maintenance work or
repairs. Disconnect the ADC Compact from the mains before making
repairs or performing any maintenance activities.
· As is the case for all technical devices, the ADC Compact must be
operated, cared for and serviced correctly.
· If you don't operate the ADC Compact correctly or if you don't have it
serviced correctly, Agfa-Gevaert is not liable for resulting disturbances,
damages or injuries.
· When installing the ADC Compact, care must be taken to ensure that there
is either a mains plug or an all-cable disconnecting device in the internal
installation fitted near the ADC Compact and that it is easily accessible.
· If you notice conspicuous noise or smoke, disconnect the ADC Compact
immediately.