Charging a battery
To charge a battery using the battery charger:
1. Connect the power supply to the mains power and to the power socket of
the battery charger.
2. Insert the battery in an empty slot of the battery charger.
The battery charger automatically detects the battery and starts charging
the battery.
The battery status can be read from the indicator lights.
The charge level of the battery is monitored and it is kept at maximum
level until the battery is removed from the battery charger.
3. Remove the charged battery from the battery charger.
Related Links
Safety Directions on page 67
DR Detector Battery Charger on page 21
DR Detector Battery Charger on page 21
Topics:
• Inserting a battery in the battery charger
• Charging the battery using the DR detector cable
DX-D 45C, DX-D 45G | Advanced Operating | 91
0292B EN 20190401 1627
To Next Page
Loading...
