Charging the battery using the DR detector cable
Connect the DR Detector cable to charge the battery that is attached to the DR
Detector. The battery status can be read from the DR Detector Switch on the
NX Workstation.
While charging, the DR Detector can still be used. If the DR Detector is used
with the DR Detector cable connected, make sure that a battery is always
attached.
Related Links
DR Detector Switch on the NX Workstation on page 24
DR Detector cable on page 18
DX-D 45C, DX-D 45G | Advanced Operating | 93
0292B EN 20190401 1627
To Next Page
Loading...
