• To connect to the hospital network, select name of the hospital
network.
Do not enable the option to connect automatically to the hospital
network.
The NX Workstation is connected to the hospital network to retrieve
data from the RIS or to print or archive images.
No communication to the DR Detector is possible, no exposures can be
performed.
• To connect to the wireless DR Detector, select the name of the detector.
The option to connect automatically to the DR Detector can be
enabled.
The NX Workstation is connected to the DR Detector to make
exposures.
No communication to the hospital network is possible, e.g. to RIS or
PACS.
4. Touch the Connect button.
The network connection is switched to the selected wireless network.
Related Links
Configuration on page 12
Password requested when connecting to the DR Detector via the wireless network
on page 101
DX-D 45C, DX-D 45G | Advanced Operating | 97
0292B EN 20190401 1627
To Next Page
Loading...
