10
Turning the Power On and Off
There are two ways to turn on the camera:
• The start up image displays briefly and the startup sound
plays if enabled. The zoom lens extends and the camera is turned on in Record mode.
• The camera is turned on in Playback mode. The zoom lens is not extended. To
turn off the camera, press the Power button.
See "Modes” on page 11 to know more about Record and Playback mode.
Initial Settings
When you turn on your camera for the first time, you will be asked to do the initial settings of
your camera.
When you turn the Power button on, the Language Menu is displayed on the LCD screen for you
to setup the display language.
Sett
ing
the
La
nguage
1. Press , , or to move through the selection.
2. Select a language, then press SET to apply.
Sett
ing
the
Date
&
Time
1. Press or to move through the selection.
2. Press
the
or
keys to change the value for the date and time.
To Next Page
Loading...
