First-Time Set Up 4
16900 Series Logic Analysis Systems Installation Guide 79
First-Time Set Up On Legacy 16900 Series Systems With
Windows XP Installation
The legacy 16900 series logic analysis systems are shipped with Windows
XP installation. The first time you turn on these systems, the Windows
®
Welcome session starts. Your logic analyzer configuration and the answers
to the Windows Welcome questions are affected by how you choose to use
the logic analyzer.
Answering Windows Welcome Questions
Once you have determined how you want to use your logic analyzer and
your network configuration, power up your logic analyzer and answer the
Windows Welcome questions.
Table 5 Answering Windows Welcome Questions
Standalone (No LAN) Workgroup Domain
Help protect your PC N/A Choose “Help protect my PC
by turning on Automatic
Updates now”.
Choose “Help protect my PC
by turning on Automatic
Updates now”.
What's your computer's
name? (After answering,
wait several minutes for next
question to appear)
If your organization has a standard naming scheme, use that scheme. Otherwise, choose
a descriptive name that follows the suggestions on the screen (less than 15 characters,
etc.)
What's your administrator
password?
Agilent recommends entering an administrator password for administrator accounts. See
page 83 for actions that require administrator accounts.
Is this computer in a domain? No
(Is given WORKGROUP
membership)
No
(Is given WORKGROUP
membership)
Yes
Enter the domain name the
logic analysis system will log
onto.
Enter your domain settings. N/A N/A Enter the name/password of
a user who can add the logic
analysis system to the
domain.
Checking your Internet
connectivity
Press 'Skip' Wait for this to finish. Wait for this to finish.
To Next Page
Loading...
Need help?
General
