6 5975/5977 Series MSD Operation Manual
To Install a Capillary Column in the GC/MS Interface Using a
Standard Column Nut 42
3 Operating in Electron Ionization (EI) Mode
Operating the MSD from the Data System 46
Operating the MSD from the GC control panel 47
Configuring the MSD through the Web User Interface (WUI) 51
To change the network settings of the MSD 51
Operating the 5975/5977 MSD from the local control panel
(LCP) 54
Modes of operation 54
To view system status during startup 57
eModule mini display readout 61
Front Panel Instrument Status LED 61
The GC/MSD Interface 62
Before You Turn On the MSD 64
Pumping Down 65
Controlling Temperatures 65
Controlling Column Flow 65
Venting the MSD 66
Set MS Analyzer Temperatures 67
Enable the GC/MS Interface and Oven 69
View MSD Temperatures and Vacuum 70
To Calibrate Column Flow Linear Velocity 72
To Run an Autotune 74
To Open the MSD Covers 76
Vent the MSD 77
To Next Page
Loading...
Need help?
General
