3-71
Function Reference
Remote Printer Share Panel
Remote
Commands
MMEMORY:
FSHAre [1|2|
3|4][:P
ATH] <param>
MMEMORY:FS
HAre [
1|2|3|4]
[:ADDRess
]<param>
Remote Printer Share Panel
Uses the LAN (local area network) to print to designated, network printers.
See “Recalling Measurement and Trace Data” on page 2-24
Note To access the file and printer share softkeys, you must first configure the
network and enter the user share identity/user profile information for remote
shares. The softkeys for file and printer share will then become available for
selection.
Key Path System > More System Functions > GPIB & Network Setup > Printer Shares
> Remote File Share
Related Functions Remote File Share
Remote
Commands
HCOPy:
DEVic
e:PSHare[
1|2|3
|4][:P
ATH]<p
aram>
HCOPy:
DEVic
e:PSHare[
1|2|3
|4]:A
DDRess
<param>
HCOPy:DESTination”SYSTem:COMMunicate:NETWork[1|2|3|4]
Repeat Sweep
Sweeps the spectrum continuously and updates the measurement data after
each sweep. Repeat Sweep ensures evenly timed sweeps for a stable display of
the current tuning range. Sweeps will continuously repeat as long as the
instrument is in repeat sweep mode. The SWEEP indicator light on the front
panel of the instrument is on when the sweep is in progress. See “Single
Sweep” on page 3-86
Key Path Bandwidth/Sweep > Repeat Sweep
Related Functions Single Sweep
To Next Page
Loading...
Need help?
General
