Safety Practices and Hazards
10 Cary Eclipse Fluorescence Spectrophotometer User’s Guide
WARNING
Shock Hazard
To avoid electrical shock this equipment must be disconnected from the
mains supply before servicing.
Panels, covers and modules
You are permitted to remove the top colored cover to:
Replace the lamp module.
Adjust the lamp module.
Any other panels or covers, which are retained by screws on the
spectrophotometer and accessories, may be opened ONLY by Agilent-
trained, Agilent-qualified, or Agilent-approved service engineers.
Consult the manuals or product labels supplied with your computer,
monitor and printer to determine which parts are operator-
accessible.
Operators and other unauthorized personnel are permitted access
ONLY to the lamp module and the sample compartment of the Cary
Eclipse. ALWAYS switch off the instrument and disconnect the mains
cord before changing a lamp module.
Other precautions
The lamp module operates at a high temperature, and touching it
may result in burns. Before replacing a lamp module that has been
operating, switch off the Cary Eclipse and ensure that the lamp
module has cooled, or protect your fingers from burns.
Do not block the ventilation grilles on the spectrophotometer and
accessories. Consult the manuals supplied with your computer,
monitor and printer for their specific ventilation requirements.
Use of the Cary Eclipse system and accessories may involve
materials, solvents and solutions, which are flammable, corrosive,
toxic or otherwise hazardous.
To Next Page
Loading...
Need help?
General
