Introduction
Cary Eclipse Fluorescence Spectrophotometer User’s Guide 19
Weights and dimensions
Weight
Packed: 54 kg (119 lb)
Unpacked: 31 kg (68 lb)
Dimensions (width x depth x height)
Packed: 820 x 760 x 560 mm (32 x 30 x 22 in)
Unpacked: 600 x 610 x 280 mm (24 x 24 x 11 in)
Power
Voltage: 100–240 VAC
Frequency: 50–60 Hz Hz
Consumption: 180 VA (approximately)
Mains inlet coupler: 3/2 A 120/250 VAC 50–60 Hz IEC type
Connections
Mains power cord
Only use the country specific, Agilent supplied power cord with your
Cary Eclipse.
Front
Accessory connection: 25-pin D-range connector (low voltage DC/AC
and digital/analog lines)
Position the instrument on the bench to allow easy access to the
power switch located on the front of the instrument.
Rear
IEEE 488 (GPIB Cary Eclipse system connection)
To Next Page
Loading...
Need help?
General
