Maintenance and Spare Parts
32 Cary Eclipse Fluorescence Spectrophotometer User’s Guide
Cleaning
Any spills in the sample compartment should be immediately wiped
up.
The exterior surfaces of the Cary Eclipse spectrophotometer should
be kept clean. All cleaning should be done with a soft cloth. If
necessary, this cloth can be dampened with water or a mild
detergent. Do not use organic solvents or abrasive cleaning agents.
Lamp module
This section describes how to replace the lamp module and realign
the light beam. Before changing the lamp module, always disconnect
the Cary Eclipse from the mains supply.
NOTE
These instructions are also provided in the Cary Eclipse Help, including videos
to demonstrate the procedure. To access the Cary Eclipse Help, click the Cary
Eclipse folder on the computer desktop and then double-click the Cary Eclipse
Help.
Replacing
WARNING
Eye and Electrical Shock Hazards
When operating, the lamp module emits high intensity light which can
damage eyes. To avoid eye damage, never operate the lamp module outside
the instrument.
The lamp module contains components operating at high voltages. To avoid
electric shock, NEVER disassemble the lamp module.
To Next Page
Loading...
