Safety Practices and Hazards
Cary Eclipse Fluorescence Spectrophotometer User’s Guide 13
Color coding
The various indicator lights appearing on Agilent instruments and
associated accessories are color-coded to represent the status of the
instrument or accessory.
A steady green light indicates the instrument is in normal or
standby mode.
A flashing green light indicates the instrument is
scanning/reading.
A steady orange light indicates the instrument is starting up.
A flashing orange light indicates that there is a problem with the
instrument, and it may require servicing.
A steady yellow light indicates that the instrument is initializing.
CE compliance
Agilent Cary Eclipse instruments have been designed to comply with
the requirements of the Electromagnetic Compatibility (EMC)
Directive and the Low Voltage (electrical safety) Directive (commonly
referred to as the LVD) of the European Union. Agilent has
confirmed that each product complies with the relevant directives by
testing a prototype against the prescribed EN (European Norm)
standards.
Proof that a product complies with the directives is indicated by:
The CE marking appearing on the rear of the product.
The documentation package that accompanies the product,
containing a copy of the Declaration of Conformity. This
declaration is the legal declaration by Agilent that the product
complies with the directives and also shows the EN standards to
which the product was tested to demonstrate compliance.
To Next Page
Loading...
Need help?
General
