Agilent Technologies E4404B User Manual

5-16 Chapter 5
Making GSM Cable and Antenna Measurements
Making Loss/Gain Measurements
3. Make the measurement.
a. Re-connect the tracking generator to the BPF input and the BPF
output to the spectrum analyzer.
b. Read the measurement and save it if required.
Use the marker to evaluate the result and save the trace if
required.
An example is shown in Figure 5-9.
Figure 5-9 Example Loss/Gain Measurement for a Bandpass Filter

Agilent Technologies E4404B Specifications

General

Brand	Agilent Technologies
Model	E4404B
Category	Measuring Instruments
Language	English