7-2 Service Guide E8364-90026
Repair and Replacement Procedures PNA Series Microwave Network Analyzers
Information in This Chapter E8362B, E8363B, E8364B
Information in This Chapter
This chapter contains procedures for removing and replacing the major assemblies of your
Agilent Technologies PNA series microwave network analyzer.
Chapter Seven at-a-Glance
Section Title Summary of Content Start Page
Before Starting the Removal
and Replacement Procedures
Warnings and cautions pertaining to personal
safety and ESD protection.
The proper assembly replacement sequence
for your analyzer.
Page 7-3
Table of Removal and
Replacement Procedures
A table of removal and replacement
procedures and the corresponding page
number where they are located.
Page 7-4
Removal and Replacement
Procedures
The actual procedures for removing and
replacing the major assemblies in your
analyzer.
The procedures occur in assembly reference
designator numerical order.
See Table 7-1
on page 7-4
for specific
procedures.
Post-Repair Procedures A table for the proper tests, verifications, and
adjustments to perform on your analyzer after
repair.
Page 7-80
To Next Page
Loading...
Need help?
General
