30 Chapter 2
Installation
Power Supply and Blown Fuses
Blown Fuses
If the fuse appears to have blown during operation, this instrument may be subject to
failure and must be repaired. Ship the E5061A/E5062A to the nearest Agilent Technologies
Service Center by seeing Section “Considerations When Shipping to a Service Center Due
to Breakdown or Other Problem” on page 39
The product uses the following fuse type: UL/CSA Type, Slow-Blo, 6.3 A-250 Vac
WARNING Do NOT replace the fuse yourself; doing this may expose you to dangerous electrical
shock.
To Next Page
Loading...
