To Next Page

To Previous Page

100 1290 Infinity Quaternary Pump User Manual

7 Error Information

General Error Messages

Leak Sensor Short

Error ID: 0082

The leak sensor in the module has failed (short circuit).

The current through the leak sensor is dependent on temperature. A leak

is detected when solvent cools the leak sensor, causing the leak sensor

current to change within defined limits. If the current increases above the

upper limit, the error message is generated.

Leak Sensor Open

Error ID: 0083

The leak sensor in the module has failed (open circuit).

The current through the leak sensor is dependent on temperature. A leak

is detected when solvent cools the leak sensor, causing the leak- sensor

current to change within defined limits. If the current falls outside the

lower limit, the error message is generated.

Probable cause Suggested actions

1 Defective leak sensor.