90 1290 Infinity Quaternary Pump User Manual
6 Troubleshooting and Diagnostics
Overview of the Module’s Indicators and Test Functions
Overview of the Module’s Indicators and Test Functions
Status Indicators
The module is provided with two status indicators which indicate the
operational state of the module. The status indicators provide a quick
visual check of the operation of the module.
Error Messages
In the event of an electronic, mechanical or hydraulic failure, the module
generates an error message in the user interface. For each message, a
short description of the failure, a list of probable causes of the problem,
and a list of suggested actions to fix the problem are provided (see
chapter Error Information).
Test Functions
A series of test functions are available for troubleshooting and operational
verification after exchanging internal components (see Tests and
Calibrations).
Diagnostic Signals
The module has several signals (internal temperatures, voltages and
currents of lamps) that can be used for diagnosing baseline problems.
These can be added like normal signals in the Agilent ChemStation
software.
To Next Page
Loading...
Need help?
General
