1260 Infinity II Flexible Pump User Manual 119
7 Error Information
What Are Error Messages 121
General Error Messages 122
Timeout 122
Shutdown 123
Remote Timeout 124
Lost CAN Partner 124
Leak Sensor Short 125
Leak Sensor Open 126
Compensation Sensor Open 126
Compensation Sensor Short 127
Fan Failed 128
Leak 129
Pump Error Messages 130
Pressure of quaternary pump above upper limit 130
Pressure below lower limit 131
Target pressure not reached for quaternary pump degasser 131
Solvent counter exceeded limit 132
Waste counter limit exceeded 132
Flow rate limit exceeded 133
Quaternary pump shutdown during analysis 133
Reading the pump encoder tag failed 134
Writing the pump encoder tag failed 134
Pump drive blocked or encoder failed 135
Drive current too low 135
Drive current too high 136
Drive timeout 136
Overcurrent of pump drive 137
Deliver underrun 137
Defect connection between main board and pump drive encoder 138
Pump drive encoder defect 138
Multipurpose Valve failed 138
Reading of multipurpose valve tag failed 139
Pump drive encoder rollover 139
Drive position limit 139
Insufficient power of drive encoder LED 140
Drive encoder error 140
Writing the multipurpose valve tag failed 140
Unknown multipurpose valve type 141
Pump drive encoder error 141
Pump drive error 141
To Next Page
Loading...
Need help?
General
