1260 Infinity II Flexible Pump User Manual 35
2 Site Requirements and Specifications
Performance Specifications
Solvent selection valve Internal 4-solvent gradient formation
valve included.
External 2 x 12 solvent valve as
option, fully integrated in the pump
control interface.
Integrated degassing
unit
Number of channels: 4,
Internal volume per channel: 1.5 mL
Materials in contact
with solvent
TFE/PDD copolymer, FEP, PEEK,
PPS, MP35N, zirconium oxide, gold,
FFKM, titanium
Automatic purge valve Enables automatic
software-embedded functionalities
such as switching the optional mixer
in and out or automatic purging.
Active seal wash Included
Intelligent System
Emulation Technology
(ISET)
Included
Instrument control LC & CE Drivers Rev. 3.4 or above
Instrument Control Framework (ICF)
A.02.03 or above in Emulation Mode
only
Instant Pilot (G4208A) with firmware
B.02.24 or above
Lab Advisor software B.02.17 or
above
For details about supported software
versions refer to the compatibility
matrix of your version of the LC & CE
Drivers
Communication Controller Area Network (CAN), LAN,
RS232C, APG remote: ready, start,
stop, and shutdown signals
Safety features and
maintenance
Leak detection, safe leak handling,
leak output signal for shutdown of
the pumping system.
No hazardous voltages in major
maintenance areas.
Extensive diagnostics, error
detection and display with Agilent
Lab Advisor software.
Table 4 Performance Specifications
Type Specification Comments
To Next Page
Loading...
Need help?
General
