Agilent Technologies G7117B User Manual

Agilent InfinityLab LC Series Diode Array Detectors User Manual 213
13 LAN Configuration
Dynamic Host Configuration Protocol (DHCP)
3 Turn on the module that hosts the LAN interface.
4 Configure your Control Software (e.g. OpenLAB CDS ChemStation Edition, Lab
Advisor, Firmware Update Tool) and use MAC address as host name, e.g.
0030d3177321.
The LC system should become visible in the control software (see Note in
section “General Information (DHCP)” on page 211).
Table 35 LC Modules with 8-bit configuration switch (B-firmware) (configuration switch at rear
of the instrument)
SW 6 SW 7 SW 8 Initialization Mode
ON OFF OFF DHCP

Agilent Technologies G7117B Specifications

General

Brand	Agilent Technologies
Model	G7117B
Category	Security Sensors
Language	English