110
Order online at www
.agilent.com/chem/store
Before ordering parts for NPD maintenance, determine which type of NPD is installed on
your GC. The NPD is available in two versions:
• Dedicated, Capillary Optimized: for capillary columns only
• Adaptable: for packed or capillary columns
Hint: Adaptable jets are longer than dedicated capillary jets.
NPD Jets
Description Jet Tip ID Length (mm) Part No.
Jets for capillary optimized fittings
Capillary with extended
jet (recommended)
0.29 mm (0.011 in.) 51.5 G1534-80580
Capillary 0.29 mm (0.011 in.) 53 G1531-80560
Capillary, high
temperature
0.47 mm (0.018 in.) 48 G1531-80620
Jets for adaptable fittings
Capillary with extended
jet (recommended)
0.29 mm (0.11 inch) 70.5 G1534-80590
Capillary 0.29 mm (0.011 in.) 61.5 19244-80560
Capillary, high
temperature
0.47 mm (0.018 in.) 61.5 19244-80620
Packed 0.46 mm (0.018 in.) 63.5 18710-20119
NPD Jet Identification and Selection
Adaptable fitting Capillary optimized fitting
Detector fitting
Adapter
To Next Page
Loading...
Need help?
General
