Agilent Technologies gc/ms series User Manual

54
Order online at www
.agilent.com/chem/store
Fittings, Ferrules and Supplies
Description Part No.
Internal nut G2855-20530
Swaging nut G2855-20555
Column storage fitting G2855-20590
Fused silica, deactivated, 0.15 mm x 1 m 160-2625-1
Fused silica, deactivated, 0.15 mm x 5 m 160-2625-5
Fused silica, deactivated, 0.15 mm x 10 m 160-2625-10
SilTite Metal Ferrules, 0.10-0.25 mm ID capillary columns 5188-5361
SilTite Metal Ferrules, 0.32 mm ID capillary columns 5188-5362
SilTite Metal Ferrules, 0.53 mm ID capillary columns 5188-5363
Capillary Flow Technology Supplies
Agilent offers a family of GC accessories based on our proprietary Capillary Flow
technology. These accessories increase system productivity and performance:
• QuickSwap MSD interface provides vent-free removal of columns.
• Deans Switch device simplifies the analysis of complex samples.
• Purged Effluent Splitter for inert, leak-free column effluent splitting.
Fittings, Ferrules and Supplies
For leak-free, low dead volume and inert column connections with capillary flow
accessories, such as the Deans Switch or QuickSwap MSD Interface, use only Siltite
ferrules and specified nuts. For Capillary Flow devices, use deactivated fused silica
tubing. Do not use tubing that has been coated with stationary phase.
Capillary Flow fittings

Agilent Technologies gc/ms series Specifications

General

Brand	Agilent Technologies
Model	gc/ms series
Category	Laboratory Equipment
Language	English