Agilent Technologies gc/ms series User Manual

135
Order online at www.agilent.com/chem/store
GC/MS Systems
Installing a capillary column in the GC/MSD interface
QuickSwap MS Interface Restrictors
Agilent's QuickSwap capillary flow technology module and pre-swaged fused silica
tubing restrictors can increase the productivity of your Agilent 5973N and 5975 inert
MSD systems, allowing you to change columns without venting the MSD. QuickSwap
not included.
These restrictors are prefabricated for convenience and ease of use. For applications
requiring other restrictor sizes, Agilent offers a wide variety of deactivated fused silica
tubing, SilTite ferrules and swaging tools.
Analyzer chamber
GC/MSD interface
(MSD end)
1
to 2 mm
MSD
Interface column nut
Column
GC/MSD interface
(GC end)
GC
QuickSwap restrictor
QuickSwap MS Interface Restrictors
Description ID (mm) Unit Part No.
Quick Swap Restrictor 0.092 4/pk G3185-60361
Quick Swap Restrictor 0.100 4/pk G3185-60362
Quick Swap Restrictor 0.110 4/pk G3185-60363
Quick Swap Restrictor 0.120 4/pk G3185-60364
Quick Swap Restrictor Variety Pack, 2 each of the above ID restrictors
G3185-60300

Agilent Technologies gc/ms series Specifications

General

Brand	Agilent Technologies
Model	gc/ms series
Category	Laboratory Equipment
Language	English