Agilent Technologies gc/ms series

127
Order online at www.agilent.com/chem/store
GC/MS Systems
Tools
Screwdriver, 3 in. Pozidriv shaft No. 1 pt, fits no. 2-4 screws 8710-0899
S
crewdriver, 4 in. Pozidriv shaft No. 2 pt, Fits no. 5-10 screws 8710-0900
Open end wrench, 1/4 and 5/16 in. 8710-0510
MS Interface Column Installation Tool G1099-20030
Hex nut driver, 5.5 mm 8710-1220
Screwdriver, Torx T20 8710-1615
Screwdriver, Torx T15 8710-1622
Screwdriver, Torx T10 5182-3466
Ferrules
0.4 mm Vespel Graphite ferrule for 200/250 µm columns, 10/pk 5062-3508
0.5 mm Vespel Graphite ferrule for 320 µm columns, 10/pk 5062-3506
250 µm Vespel/Graphite ferrule, 10/pk 5181-3323
SilTite metal ferrules for 1/16 in. OD tubing, 10/pk
Includes 2 column nuts
5184-3571
SilTite Metal Ferrules, 1/16 in. x 0.4 mm ID, 10/pk
Includes 2 column nuts
5184-3569
SilTite Metal Ferrules, 1/16 in. x 0.5 mm ID, 10/pk
Includes 2 column nuts
5184-3570
MS Interface Supplies
MS interface column nut, female 05988-20066
Column nut for long or long two-hole ferrules 05921-21170
Universal column nut, 2/pk 5181-8830
Cleaning and Maintenance Supplies
Description Part No.
C
olumn installation tool, G1099-20030
Vespel/Graphite ferrules, 5181-3323