17
Order online at www.agilent.com/chem/store
Gas Management
• Accuracy ± 3%.
• Operating temperature range – 0 to 45ºC for the instrument, -70 to 135ºC
for the tubing.
• Calibration – traceable to NIST primary standards.
• Real time, split ratio measurement.
• CE mark certified.
• Measures flow rates from 0.5 to 1000 mL/min.
• Split ratios – compare the ratio from one gas measurement to another
(i.e., injection port split ratios).
In addition to the features of the ADM 1000, the ADM 2000 includes:
• Mass flow measurements – measure flow rate, independent of atmospheric pressure
and temperature (calculated).
• Data output through RS-232 port.
• 9V battery and AC power adapter (120 or 220 VAC).
ADM Flowmeters
Description Flow Rate
(mL/min)
Gases
Measured*
Accuracy (%) Power
Supply
RS-232
Data Output
Part No.
Low High
ADM 1000** 0.5 1000 All ± 3 9V Battery None 220-1170
ADM 2000** 0.5 1000 All ± 3 Battery or 120V AC Yes 220-1171-U
ADM 2000E** 0.5 1000 All ± 3 AC Adapter, 220V Yes 220-1171-E
Carrying Case for ADM 907-0056
*± 3% or ± 0.2 mL/min, whichever is greater with a flow rate of 0.5 - 1,000 mL/min
**Non-corrosive gases only
ADM flowmeters
ADM 1000
ADM 2000
To Next Page
Loading...
