68
Order online at www
.agilent.com/chem/store
Washers, 5061-5869
Reducing nut, 18740-20800
Certified gold inlet seal, 5188-5367
7890/6890/6850 Split/Splitless Inlet Supplies
Item Description Unit Part No.
12 Lower insulation cover 19243-00070
13 Ferrules see page 52
14 Universal column nut 2/pk 5181-8830
6850 column nut 2/pk 5183-4732
Split/splitless septum nut angled wrench 19251-00100
Flip Top Inlet Sealing System
For 6890, 6850, 5890 only; Not compatible with 7890
5188-2717
Capillary Inlet Supplies Kit, Includes: 5181-8838
Certified gold plated seal kit, includes washer 5188-5367
Liner, split, straight, glass wool, non-deactivated 4 each* 19251-60540
Liner
, splitless, single-taper, glass wool, deactivated
2 each* 5062-3587
Certified non-stick fluorocarbon O-ring 10/pk* 5188-5365
Liner, direct, 2 mm ID, deactivated 5181-8818
11 mm non-stick BTO septa 50/pk* 5183-4757
Capillary inlet cleaning wires 5/pk* 5180-4153
1
Order replacement cartridge G1544-80530 at same time
2
Use with total inlet flow rates of less than 200 mL/min
3
Use with total flow rates of greater than 200 mL/min
*Quantity when part ordered individually
6
Split vent trap kit
1
G
1544-60610
Replacement cartridge for P/N G1544-60610 G1544-80530
Split vent trap assembly G1544-80550
7 Retaining nut G1544-20590
8 Stainless steel seal 18740-20880
Certified gold plated seal kit, includes washer
2
Replacement for 18740-20885
5188-5367
Gold-plated seal with cross
3
5182-9652
9 Washers, 0.375 OD 12/pk 5061-5869
10 Reducing nut 18740-20800
11 Insulation Kit, 3 pieces 5188-5241
To Next Page
Loading...
