93
Order online at www.agilent.com/chem/store
Detectors
Electron Capture Detector (ECD) Supplies
Item Description Part No.
1 Standard ECD makeup gas adapter* G1533-80565
M
icro ECD makeup gas adapter G2397-80520
Micro ECD mixing liner, also compatible with standard ECD design G2397-20540
ECD makeup gas adapter, 7890A only G3433-67565
2, 3 Insulating cup 19234-60720
Gigabore liner for standard ECD, polyamide coating, not compatible
with micro ECD
19233-20625
ECD adapter end cap 19233-20755
Ferrule, 1/4 in. Vespel 5080-8774
1/4 in. nut, brass 5180-4105
Electron Capture Detector Sample
This sample is used for the HP 5880, 5890 and 6890 with an ECD.
Solution of 33 pg/mL (0.033 ppm) (w/v) each of lindane and aldrin in
isooctane. Three 0.5 mL ampoules.
18713-60040
Micro ECD wipe test kit 18713-60050
*Includes one each of P/N 19233-20625 and 19233-20755
ECD Warnings
Although beta particles at this energy level have little penetrating power – the surface layer of the skin or a few sheets
of paper will stop most of them – they may be hazardous if the isotope is ingested or inhaled. For this reason the cell
must be handled with care. Radioactive leak tests must be performed at the required intervals, the inlet and outlet
fittings must be capped when the detector is not in use, corrosive chemicals must not be introduced into the detector,
and the effluent from the detector must be vented outside the laboratory environment.
Electron Capture Detector (ECD) assembly
To Next Page
Loading...
Need help?
General
