Agilent Technologies HP 5890 II Series User Manual

Installation
Connecting power line cord
37
Message indicating normal termina-
tion of diagnostic tests after power
restoration. User setpoints remain
in force.
LEDs off, except possibly NOT
READY.
HP 5890 Self-testing in progress.
LEDs off, except possibly NOT
READY.
HP 5890 memory test in progress.
Test of display elements: all alpha-
numeric and LED elements are lit.
INITIAL
TIME
RATE
OVEN
FINAL
TIME
STATUS
OVEN STATUS
OVEN STATUS
OVEN STATUS
INITIAL
TIME
RATE
FINAL
TIME
INITIAL
TIME
RATE
FINAL
TIME
INITIAL
TIME
RATE
FINAL
TIME
RUN
NOT
READ
Y
RUN
NOT
READ
Y
RUN
NOT
READ
Y
RUN
NOT
READ
Y
Normal Integrity Check At Power-on
2. Review the self•diagnosticelectronic performance verification: this
requires about 30 seconds.
Successful completion is indicated when the message PASSED SELF
TEST is displayed.
3. When PASSED SELF TEST is displayed, verify that the keyboard is
active by pressing
OVEN TEMP
. The display should change
immediately to one showing current oven status.

Agilent Technologies HP 5890 II Series Specifications

General

Brand	Agilent Technologies
Model	HP 5890 II Series
Category	Measuring Instruments
Language	English